Pneumatic ceramic feed valve
- Products
- Ball valve
- Butterfly valve
- Gate valve
- Globe Valve
- Check valve
- Anticorrosive valve
- Forged steel valve
- Regulating valve
- Hydraulic control valve
- Power station valve
- Drain valve
- Bellows valve
- Metallurgical valve
- Flame arrester and breathing valve
- Solenoid valve
- Needle valve
- Copper valve
- Ceramic valve
- Oil field valve
- Safety valve
- Actuator series
Nominal diameter: DN50-500mm
Connection: Flange
Body Material: Carbon steel
Medium: dry ash, cinder medium high wear
Material: Ceramic
Seals form: hard seal type
Driving method: Pneumatic
Pressure Environment: often pressure
Working temperature: room temperature
Pneumatic ceramic feed valve overview
JZ644TC Pneumatic Ceramics Feed Valve, JZ644TC-10C Pneumatic Ceramics Feed Valve, JZ644TC-10Q Ceramics Feed Valve, Pneumatic Feed Valve This valve is suitable for power plant dry ash system, warehouse pump discharge conveying, but also for mining, Paper, chemical and other types of wear and tear of dry dust, water, such as (ash water) and other media, in the pipeline for hoist purposes. Nominal pressure 1.0MPa, to adapt to the temperature ≤ 200 ℃, air pressure 0.6-0.8MPa. The valve is closed in any direction after all sealed. Body intermediate WCB cast steel or stainless steel castings. Sealing surface with a hard seal. The material mouth full flow unobstructed, wear resistance, sealing performance, aerodynamic load of small ash and ash phenomenon less. The valve is made of high-end ceramic structure has a tough seal, high mechanical strength, good wear resistance, long service life.
JZ644TC pneumatic ceramic valve main parameters
|
Brand: |
Shanghai workers |
model |
JZ644TC |
|
Connection Type |
Flange |
The main material |
Carbon steel |
|
Nominal diameter |
50-500 (mm) |
Suitable media |
Dry ash, cinder and other high wear media |
|
Material |
ceramics |
Sealed form |
Hard sealing type |
|
standard |
Various standards |
Drive mode |
pneumatic |
|
Stressful environment |
Atmospheric pressure |
Operating temperature |
Room temperature |
JZ644TC pneumatic ceramic feed valve features
The ceramic discharge valve is made of ceramic seal, erosion resistance, good wear resistance. Open double gate seal structure, opening and closing process gate spin, polishing self-cleaning function, the valve closed when the two-way seal, opening and closing flexible. According to different conditions can be set up purge port, automatic purge system for dry ash, slurry, materials and other media delivery, less fouling, no jam, simple maintenance, long service life.
