CN EN
QQ
+86-577-67926668
qrCode

High-pressure lifting station check valve



Location:Products >> Power station valve >> High-pressure lifting station check valve
Model: H61Y
Nominal diameter: DN10 ~ 100mm
Nominal pressure: PN10 ~ 320MPa
Working temperature: ≤425 ℃
Design and manufacture: ASME B16.34, JB / T3595, E101
Pressure temperature: ANSI B1 6.34, JB / T74, JB / T3595, E101
Structure Length: ANSI B16.10, E101, GB / T15188.1, JB / T2766
Butt Weld Size: ASME B16.25, GB / T12224, E101
Test and Test: ISO5208, GB / T13927, JB / T3595
Product details

First, high-pressure lift check valve Overview:

The pound-type power station check valve branch pipe ends welded structure, welded groove can be produced according to the standard or user requirements, suitable for thermal power plant, petrochemical, metallurgy and other high temperature and pressure water, steam, oil, superheated steam pipe Prevent medium reflux on the device. One is to follow the introduction of ANSIB16.34 and JIS E101 standards; the other is Jb3595 standard GB. The temperature and pressure levels it follows are consistent, and some pipelines have some sort of interchange relationship. In the middle, the valve cover pressure is self-tight, which has good sealing performance under high temperature and high pressure conditions. Self-sealing ring has two kinds of materials: one is low-carbon steel, the other is flexible graphite folder 316 wire (net). Sealing surface surfacing drilling based hardmetal. The processed pure metal layer ≥ 3mm, with wear resistance, high temperature, corrosion resistance, abrasion resistance, long service life.

 

Second, high-pressure lift check valve performance specifications:

PN (MPa) Test pressure Ps (MPa) Work pressure Working temperature (degrees) Suitable media
strength Sealed (liquid) P54 P55 P57
10.0 15.0 11.0 ≤425 Water, steam, oil
16.0 24.0 17.6
20.0 30.0 22.0
25.0 37.5 27.5
32.0 48.0 36.0
P5410 30.0 22.0 10 ≤540 steam
P5414 37.5 27.5 14
P5417 48.0 36.0 17
P5510 37.5 27.5 10 ≤550
P5514 48.0 36.0 14
P5517 53.0 39.0 17
P5710 48.0 36.0 10 ≤570
P5714 55.0 40.0 14
P5717 60.0 44.0 17


 Third, high-pressure lift check valve structure Features:

1, the overall valve quenching, and can move up and down in the body, the media backwards, by media pressure and the spring valve automatically closed.

2, the valve body, valve cover are forgings.

3, the sealing surface of the valve seat using cobalt-based carbide plasma spray welding surface into. Wear-resistant, anti-abrasion performance.

4, check valve should be installed on the level of pipeline media flow from the bottom up (positive flow).

 

Fourth, high-pressure lift check valve installation size and weight:

GB 25.0MPa
DN 10 15 20 25 32 40 50 65 80 100
L 120 170 170 170 200 230 350 326 470 560
H 155 200 210 210 245 270 300 410 370 420
Wt 2.5 8.5 9 10 14 21 28 - - -
GB 32.0MPa
DN 10 15 20 25 32 40 50 65 80 100
L 120 170 170 170 200 230 350 326 470 560
H 155 200 210 210 245 270 300 410 370 420
Wt 2.5 8.5 9 10 14 21 28 - - -
P54140V
DN 10 15 20 25 32 40 50 65 80 100
L 120 170 170 170 200 230 350 326 470 560
H 155 200 210 210 245 270 300 410 370 420
Wt 2.5 8.5 9 10 14 21 28 - - -
P54170V
DN 10 15 20 25 32 40 50 65 80 100
L 120 170 170 170 200 230 350 326 470 560
H 155 200 210 210 245 270 300 410 370 420
Wt 2.5 8.5 9 10 14 21 28 - - -
P57170V
DN 10 15 20 25 32 40 50 65 80 100
L 120 170 170 170 200 230 350 326 470 560
H 155 200 210 210 245 270 300 410 370 420
Wt 2.5 8.5 9 10 14 21 28 - - -


The previous:Spur gear stop valve